Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 AH36 steel plate, AH36 steel is a kind of steel for shipbuilding and platform. Shipbuilding steel plate AH36 is the high tensile strength steel. As a professional AH36 shipbuilding steel plate exporter, Bebon international can supply steel plate AH36. ASTM A 131 AH36 shipbuilding steel plates can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons.
AH36 shipbuilding steel plate specification:
Thickness: 4mm to 260mm,
Width: 1200mm to 4000mm
Length: 3000mm to 18000mm.
AH36 steel Chemical Composition %:
Grade |
C max |
Si max |
Mn |
P max |
S max |
Als min |
Ti max |
Cu max |
Cr |
Ni |
Mo |
Nb |
V |
AH36 |
0.18 |
0.50 |
0.90-1.60 |
0.035 |
0.035 |
0.015 |
0.02 |
0.35 |
0.20 |
0.40 |
0.08 |
0.02-0.05 |
0.05-0.10 |
Note: Generally speaking CE will be ≤ 0.40%. If the delivery condition is TMPC, the CE will be : ≤ 0.38% (thickness ≤ 50mm),≤0.40%( when the thickness >50-100). Ceq% =(C+Mn)/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
AH36 steel plate Mechanical Property
Grade |
Rm |
Re(MPa) min |
A% min |
Akv/J min |
||||||
AH36 |
490-630 |
355 |
21 |
E.T °C |
Thickness (mm) |
|||||
0 |
≤ 50 |
>50-70 |
>70-100 |
|||||||
L |
C |
L |
C |
L |
C |
|||||
34 |
24 |
41 |
27 |
50 |
34 |
Note: In the list , Rm: .tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.
AH36 steel plate Condition Of Delivery
Grade |
Fine grains elements |
category |
The thickness of steel |
|||||
≤ 12 |
>12.5-20 |
>20-25 |
>25-35 |
>35-50 |
>50-100 |
|||
AH36 |
Nb+V or V |
Plate/ |
A(50) |
N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||
Profile steel |
N(50),CR(50),TM(50),AR*(25) |
- |
||||||
Al or Al+Ti |
Plate/ |
A(50) |
AR*(25) |
- |
||||
N(50),CR(50),TM(50) |
N(50),CR(25),TM(50) |
|||||||
Profile steel |
A(50) |
N(50),CR(50),TM(50),AR*(25) |
- |
Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2. The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.
AH36 steel plate Contrast in the different standard
ASTM A131M |
TOCT 5521 |
BS LR |
GB712 |
AH36 | A36 |
AH36 |
A36 |
AH36 steel plate Available Specification
variety |
Thickness (mm) | Width (mm) | Longth/ inner diameter (mm) | |
Shipbuilidng plate | cutting edges | 6~200 | 1500~3000 | 3000~15000 |
non- cutting edges | 1300~3000 | |||
Shipbuilidng coil | cutting edges | 1.2~19 | 1500~2000 | 760+20~760-70 |
non-cutting edges | 1510~2010 |
AH36 steel plate theoretical weight
Thickness (mm) |
theoretical weight | Thickness (mm) | theoretical weight | ||
Kg/ft2 | Kg/m2 | Kg/ ft2 | Kg/m2 | ||
6 | 4.376 | 47.10 | 25 | 18.962 | 196.25 |
7 | 5.105 | 54.95 | 26 | 20.420 | 204.10 |
8 | 5.834 | 62.80 | 28 | 21.879 | 219.80 |
10 | 7.293 | 78.50 | 30 | 23.337 | 235.50 |
11 | 8.751 | 86.35 | 32 | 25.525 | 251.20 |
12 | 10.21 | 94.20 | 34 | 26.254 | 266.90 |
14 | 10.939 | 109.90 | 35 | 27.713 | 274.75 |
16 | 11.669 | 125.60 | 40 | 29.172 | 314.00 |
18 | 13.127 | 141.30 | 45 | 32.818 | 353.25 |
20 | 14.586 | 157.00 | 48 | 35.006 | 376.80 |
22 | 16.044 | 172.70 | 50 | 36.464 | 392.50 |
24 | 18.232 | 188.40 |
AH36 steel plate dimensional deviation
nominal thickness(mm) |
The thickness deviation with following width (mm) | |||
≤1200 | >1200~1500 | >1500~1800 | >1800 | |
>6.0~8.0 | ±0.29 | ±0.30 | ±0.31 | ±0.35 |
>8.0~10.0 | ±0.32 | ±0.33 | ±0.34 | ±0.35 |
>10.0~12.0 | ±0.35 | ±0.36 | ±0.37 | ±0.43 |
nominal thickness(mm)
|
minus deviation (mm) | The thickness deviation with following width (mm) | |||||||||
> 1000 ~1200 | > 1200 ~1500 | > 1500 ~1700 | > 1700 ~1800 | > 1800 ~2000 | > 2000 ~2300 | > 2300 ~2500 | > 2500 ~2600 | 2600 ~2800 | > 2800 ~3000 | ||
>12~25 | -0.8 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.8 | +1.0 | +1.1 | +1.2 |
>25~30 | -0.9 | +0.2 | +0.2 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.1 | +1.2 |
>30~34 | -1.0 | +0.2 | +0.3 | +0.3 | +0.4 | +0.6 | +0.8 | +0.9 | +1.0 | +1.2 | +1.3 |
>34~40 | -1.1 | +0.3 | +0.4 | +0.5 | +0.6 | +0.7 | +0.9 | +1.0 | +1.1 | +1.3 | +1.4 |
>40~45 | -1.2 | +0.4 | +0.5 | +0.6 | +0.7 | +0.8 | +1.0 | +1.1 | +1.2 | +1.4 | +1.5 |
Gas cylinder steel plate is used in welded gas cylinder and related products. supplies gas cylinder steel with better anti-stress capability. Popular......
Moreshipbuilding steel plate suppliers,we supply A,B,D,E,AH32,DH32,EH32,FH32,AH36,DH36,EH36,FH36,AH40,DH40,EH40,FH40 with ABS,DNV,GL ....
MoreBoiler and pressure vessel grade steel comes in a variety of grades and thicknesses, and are designed to withstand the immense internal ......
MoreAlloy steel is steel that is alloyed with a variety of elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. ...
MoreSteel grade Q345B is the most common used as high strength low alloy structural steel in industry area. ...
MoreQ235 steel is Chinese structural steel, Q235A Q235B Q235C Q235D material density: 7.85 g/cm3, properties, specification, composition .. ..
More